Integrate a Trim Reveal Into Doors/Windows

On occasion you may want to pull the interior finish of a wall away from the trim/frame to show a reveal. In the past we have done this with a beam/column/morph SEO around each opening. Now, thanks to a strange glitch in a project, we can replicate a reveal integrated into the Cadimage door and window settings.

First, in the window/door settings, open up the “All Parameters…” drop down from the top of the Cadimage Window – Settings portion of the selection settings.Screen Shot 2016-04-13 at 10.52.18 AM

Next scroll down until you see a drop down for Composite Skins. You can adjust the offset from outside of frame (Wall Hole size), to the position of the composite skins finish.Screen Shot 2016-04-13 at 10.52.36 AM

Once the trim position and frame dimensions are correct, the result for this example is a trim that is flush with the interior face of wall finish, but with a 1/2″ reveal to the trim width.Screen Shot 2016-04-13 at 10.50.47 AM

A couple of things worth noting on this setting:

  • This is a uniform reveal for all sides/top/bottom of the window or door’s relationship to the wall that it is hosted in
  • This is not measured from the trim position, but from the wall hole, or outside edge of the main frame
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s