WWA BIM

Door and Window Markers

Advertisements

When working through process, it is important to not use the “no marker” setting in the doors and windows; unless a door or window will never have a marker attached to it; for framed openings, shutters, shower doors, etc.

Door and window markers are library parts, that have default settings. So when a marker is set to “no marker” to hide, then turned back to W Marker 21/22 or D Marker 21/22, the settings go back to their default. These defaults do not match our graphic standards for pens, font, marker type, or any other setting. Markers switched off at the element level, then turned back on need to be meticulously realigned with the projects graphics and our office graphic standards.

The proper way to hide door and window markers throughout the entire plan is through model view options. Either a temporary “custom” MVO can be used to turn markers off, or a dedicated MVO (such as our template 00 | Presentation Plan) can be applied.

 

The Wrong Way!

  1. Place Doors & Windows from Favorites:

2. Door/Window Marker Settings from Favorites (correctly showing D Marker 21)

3. Set Marker to No Marker… Nope! Don’t do it!

4. When Marker is reset to D Marker 21(22), it comes back looking like this; and it takes a lot of time to rebuild to the correct settings defined by the favorites.

5. Turn markers off using the Model View Options instead!

Note: in ARCHICAD 22, there are no “Custom” MVO’s. If Markers are turned off for the 02 | Construction Documents they will be off for all views using that setting. But unlike turning markers off at the element level, turning them off & on in the MVO will retain the default settings for the marker from the favorites.

Advertisements

Advertisements