Tag Archives: Plan Views

All Things Grid Tool

First and most importantly it is essential to realize there are multiple parts to the grid tool and its interaction with the various drawings. The Grid Settings are relatively straight forward and simple to understand.

screen-shot-2016-09-07-at-2-50-36-pm

Standard Grid Settings from Template Favorites

Above is an example of our default Grid Element Settings. If you find you do not have a Grid Element in your favorites, you can start with the line types and pen weights shown there. Also note the Naming Rules section; all grid elements have a custom name and are not generated automatically (this requires an automated grid placement that really only works for projects with very regular grids tied to beams and columns).

It is also important to note the upper right corner of the Grid Element Floor Plan Settings dialog. The drop down for Show on Story… allows you to define which stories each grid marker shows up on. I have audited projects in the past that used lines, circles, text, or even duplicate grid elements to selectively show grids on different stories. This drop down allows you to access a custom list of stories to show or hide each grid marker on. For most of our projects, this should be set to all stories for all grids, but if you need to customize this, there is an easy solution in the Grid Element Settings.

The Grid Tool Settings also have a section for Section/Elevation projections of the Grid. It is important to note that these settings DO NOT determine IF the grid will show up on Elevations or Sections, only HOW they will appear on those views.

To properly show Grids on an Elevation or Section, you need to set the Grid Settings in the views Marker Settings.

screen-shot-2016-09-07-at-2-56-55-pm

Elevation Selection Settings for Grid Appearance

To turn on Grids for an Elevation or Section simply go to the Grid Tool section of the Markers Selection Settings and check the box to Show Grid Elements. Make sure that the elevation settings do not have Auto-stagger selected. This feature can be useful, but more times than not it just messes with the opposite views appearance.

As an example, here is a quick mock up of an elevation with a grid offset:

screen-shot-2016-09-07-at-3-00-05-pm

Notice that Grid Element “C” is staggered over the top of Grid Element “B”. This is because the grid has been offset to the left of “B” on the opposite elevation. Staggering a grid element, either manually can cause this overlap. A manual adjustment applies the stagger to all elevation/section views that grid appears on. Automatic staggering should stagger grids appropriately for each view, but any manual changes will revert to the automatic position when the view is refreshed.

In the above example, Grid Element “C” may not need to appear on this elevation, since it is for a structural bearing line that does not relate to this side of the project. In the elevation or section marker settings, this Grid Element can easily be excluded from the Viewpoint of each marker individually. You simply need to go to the Marker Settings and click Selected under Show Grid Elements by Name and exclude the grids you do not want to show on that Viewpoint.

screen-shot-2016-09-07-at-3-00-38-pm

Elevation Settings to Show/Exclude Individual Grid Elements

Advertisements

Relevant Stories

Everyone should be familiar with the Floor Plan Display settings for the various element types in ARCHICAD. Some tools are very flexible in regards to which stories they are visible on, others seem very limited; namely the wall and column tool. With these tools, you only get two options; Home Story Only and All Relevant Stories. So what constitutes a Relevant Story?

For this example, I have just thrown together a couple walls in the ARCHICAD20 Residential Template, but it illustrates the point well enough.Screen Shot 2016-07-26 at 4.46.32 PM

The boundary walls are 12′ tall and extend 2′ to the the story above. The bisecting wall is 10 feet tall and is top linked to stop at exactly the story above. All walls are set to show on All Relevant Stories.

The resulting floor plans are as follows (Home Story left, Above Home Story right):

If this is not showing how you need or expect it to you can adjust the view settings to determine the constraints for a Relevant Story in the view map view settings.

Going to the Roof Story’s view settings, go to the 2D/3D Documents section and click on Floor Plan Cut Plane Settings…

Screen Shot 2016-07-26 at 4.32.14 PM

From here, you can define what extents will be considered relevant for this view. If I want the boundary walls to show as cut instead of outline as illustrated in the plan views above, I can drop the Cut Plan height to Current Story to a level that will cut the outer walls. Then if I want to include the interior wall as an outline element (not cut through), I can set the Relative Floor Plan Range: Show down to: Current Story -2′ (or any height that would include this wall.

Screen Shot 2016-07-26 at 4.32.21 PM.png

The result is that the home story for these walls has not changed, all walls are shown as cut just as before, but the story above shows with the taller walls cut and the lower wall as outline only:

One of the amazing advantages of this feature is that a wall may be Relevant for one view, but not for another. Even though the story settings match, the wall height never changes, but the wall appears on one plan view, but not another of the same story. Or it appears as cut in one plan view but as outlines only for another view of the same story.

The default for our floor plans is to have the Cut Plan height to Current Story set to 4′, and all offsets set to 0″, but there are always cases to fine tune this to show or hide elements, or change how certain elements may show in a given view.

 

STAIR MASKING

If you need to turn a background fill on your stairs, or match the fill above the break line to a background fill below the break line, the setting is in the attributes section of the stair editor. If you do not have “show fill above break line” checked, you may still have a fill in your plan view, depending on MVO and renovation overrides. To get the fill above the breakline to match the fill below the breakline, ensure this box is checked and apply a fill that works for both locations, or transparent background for stairs that do not mask.

stair fillScreen Shot 2014-11-26 at 3.04.04 PM

Screen Shot 2014-11-26 at 3.04.19 PM

SHOWING WHAT IS PLACED BELOW THE ROOF

Cadimage Coverings Pen Settings

When you need to show what is below your roof and have a Cadimage Covering applied you will need a transparent background pen for the plan view.Screen Shot 2014-09-18 at 11.32.20 AM

Select the covering and open the Selection Settings. Under the Cladding tab go to the view attributes and set the background pen to 0 Transparent. This can be repeated for edge conditions pen settings to create “transparent” flashing, gutters, ridge and barge elements as well.Screen Shot 2014-09-18 at 11.33.05 AM

The result is a fully transparent roof element in floor plan view.  This will allow you to view elements below the covering in model space as well as on the sheet with multiple layered plans.

Screen Shot 2014-09-18 at 11.33.23 AM